What is the working principle of a carbon black ultrafine grinding mill?

The white carbon black process has a powder coverage of 325 mesh to 5 microns. It has a wide range of applications and is sold to more manufacturers. Helped many silica powder manufacturers to increase carbon black powder production and increase the market value of mineral powder.

White carbon black is the general name for white powdery X-ray amorphous silicic acid and silicate products, mainly refers to precipitated silica, fumed silica, ultrafine silica gel and aerogel, also including powdered Synthetic aluminum silicate and calcium silicate, etc.

1. White carbon black is used in colored rubber products to replace carbon black for reinforcement to meet the needs of white or translucent products.

2. In agricultural chemicals, such as pesticides, high-efficiency spray fertilizers, etc., using silica as a carrier or diluent can maintain long-lasting effectiveness.

3. Transparent colored and opaque toothpastes using silica as filler and abrasive have good flexibility, dispersibility, soft paste, good abrasiveness, and will not abrade the toothpaste tube; it can keep the medicinal properties of the medicated toothpaste stable. .

4. Used in adhesives made of natural rubber or synthetic rubber to provide thixotropy and reinforcement.

5. Using silica as paper filler can improve the ink penetration resistance and mechanical strength of paper, increase whiteness and reduce unit weight. The washability has been increased from more than 1,000 times to more than 10,000 times, and the aging time of artificially accelerated climate aging and artificial radiation exposure has been increased from the original 250 hours (level 1 powdering, level 2 discoloration) to 600 hours (no powdering, The paint film has no discoloration (color difference value is 4.8). In addition, the bonding strength between the paint film and the wall is greatly improved, the hardness of the paint film is significantly increased, and the surface self-cleaning ability is also improved.

6. Rubber is an elastomer with excellent stretchability, but its comprehensive performance is not satisfactory. In the process of producing rubber products, carbon black is usually added to the rubber compound to improve strength, wear resistance and aging resistance. However, Due to the addition of carbon black, the products are all black and of low grade. The advent of fumed silica (fumed white carbon black) in my country has laid the material foundation for the production of a new generation of rubber products with novel colors and excellent performance.

The first stage: broken

Large pieces of silica are transported to the raw material warehouse by special vehicles, and then the materials are sent to the jaw crusher by forklift/manpower for crushing until they are smaller than the feed size of the grinding mill.

The second stage: feeding

The silica crushed by the crusher is lifted to the storage hopper by the elevator. The storage hopper is discharged and then the feeder evenly feeds the host machine.

The third stage: grinding

During the grinding process, qualified products are screened by the screening system and then enter the collector through the pipeline. After collection, they are discharged through the discharge valve to become the finished product. Unqualified products fall into the main machine and are re-ground.

The fourth stage: collection of finished products

The purified airflow flows into the blower through the residual air duct above the dust collector. The air path is circular. Except for the positive pressure from the blower to the grinding chamber, the airflow in the other pipelines flows under negative pressure. The indoor sanitary conditions are good.